News Products Inverter Technology Alternative Energy Atlantic Hydrogen Inc. Contact Information

PRODUCTS SOLO Inverter – 1kW & 5kW Platforms SOLO Inverter – Customized Micro-Grids (for info on load management & export of power to the grid) The company is developing advanced energy management systems that will enable independent power producers to export excess power generated in their location to the electrical grid and/or use their distributed power system to meet their local load.  Development of micro-grids built around locally available power represents an important paradigm shift in the electrical sector.  Inverter – Standard Models SOLO 1000W, SOLO 5000W The most important performance features of a sine-wave inverter are accurate and efficient regulation and distortionless waveform generation. Other requirements may vary with the application and type of DC sources (such as biomass engines, fuel cells, PV, wind turbines, batteries, etc...) and are best addressed by modifying system controls and governing firmware. SOLO Fast-Analog Inverter topology uses a patented switching pre-regulator allowing hyperbolic frequency modulation, coupled with a sinusoidal pulse-width modulation. This pre-regulator feeds into a linear regulator, which provides accurate and fast feedback loop performance, coupled with accurate waveform mimicking. Linear regulators can be easily wired for constant current or constant voltage outputs, which is of importance for grid tie, stand-alone or UPS modes. The underlying principle of the PH2 Fast-Analog inverter is applicable to a wide range of applications, and additional features and functions are implemented by PIC microcontroller. A patent has been granted for the switching regulator and a patent has been submitted fo the SOLO inverter, using the switching regulator as the key element in the design. Performance specifications for the standard 1kW model are below: SOLO 1000 Inverter Specs - 1kW Platform Peak capacity 1kW Input Voltage 10-300 VDC Output Voltage 120/240 VAC, 60Hz, 45 Amps, monophase, 3 Phase Efficiency (tested) 94.5% THD < 3% Safety Anti-islanding compliant Compliance CSA/UL, UL1741, IEEE 1547,  IEEE-929 planned note: final designs to be certified Modes stand-alone grid-tie without power export grid-tie with power export Multiplexing master-slave allows multiplex up to 5 kW Performance specifications for the standard 5kW model are below:   SOLO 5000 Inverter Specs - 5kW Platform Peak capacity 5kW Input Voltage 10-300 VDC Output Voltage 120/240 VAC, 60Hz, 45 Amps, monophase, 3 Phase Efficiency (tested) 94.5% THD < 3% Safety Anti-islanding compliant Compliance CSA/UL, UL1741, IEEE 1547,  IEEE-929 planned note: final designs to be certified Modes stand-alone grid-tie without power export grid-tie with power export Multiplexing master-slave allows multiplex up to 50 kW Other specifications are possible, using a modular add-ons to the standard design, such as:  varying DC inputs (e.g. 40-80 , 400-1000)  varying AC outputs (e.g. 220 VAC, 50 Hz, 3 phase)   SOLO Inverter Platform   The SOLO inverter platform concept has a unique flexible design that allows low-cost modular adaptation for specific client needs, including ranges in peak capacity with master-slave multiplexing, MPPT, voltage inputs and output, amperage, mono, split, and three-phase combinations, and addition of battery charging capability. The SOLO inverter's firmware system is also designed to allow paralleling of integrated control systems (voltage and current loop capable) in the case of more demanding load management requirements such as microgrids.   If you are interested in using a SOLO Inverter please contact:  PH2HQ@PrecisionH2.com or complete the client info sheet:

Secure Site Investment Information  Alternative Energy links